An Empirical Survey on Various Power Transfer Techniques in Electrical Vehicle using Wireless Mode

Article Sidebar

PDF
Published: Oct 27, 2023
DOI: https://doi.org/10.17762/ijritcc.v11i9.8329
Keywords:
Wireless power transfer, optimization, efficiency, benefits, topologies, communication

Main Article Content

S.L. Sreedevi
Research Scholar, Department of Electrical and Electronics Engineering, Saveetha School of Engineering, SIMATS, Saveetha School of Engineering, SIMATS, Saveetha University, Chennai, India
B.T. Geetha
Associate Professor, Department of Electrical and Electronics Engineering, Saveetha School of Engineering, SIMATS, Saveetha School of Engineering, SIMATS, Saveetha University, Chennai, India

Abstract

This study examines the current condition of the wireless power transfer (WPT) techniques in electric vehicle. The pros and downsides of wireless power transfer are explored, as well as its   classification, application, trend, benefits and impact on society. It also offers a comparison of prior research in transfer the power wireless, pointing out upcoming different kind of method, topologies, statement, and optimization methods implemented for boost the efficiency of performance of the electric vehicle system and directing researchers in the appropriate direction for future research.

Article Details

How to Cite
Sreedevi, S., & Geetha, B. (2023). An Empirical Survey on Various Power Transfer Techniques in Electrical Vehicle using Wireless Mode. International Journal on Recent and Innovation Trends in Computing and Communication, 11(9), 150–156. https://doi.org/10.17762/ijritcc.v11i9.8329
Issue
Vol. 11 No. 9 (2023)
Section
Articles

References

M.A.Houran ,X. Yang ,and W.Chen,”Magnetically Joined Resonance WPT : Review of Compensation Topologies,Resonator Structures with Misalignments,and EMI Diagnoistics” ,MDPI Journal,2018

R. Zhang, “Communication and Signals Design for Wireless Power Transmission,” cs.IT, 2016.

A. M. Jawad, R. Nordin, and S.K. Gharghan, “Opportunities and challenge for Close –Field Wireless Power Transfer : A Review” , MDPI Journal, 2017, pp.1-28.

B. Zhu, J.Li ,W. Hu, and X. Gao, “Review of Magnetic Timbre Resonance Wireless Energy Transmission”,International Journal of u-and e-Service, Science and Technology vol .8, no.3, pp. 257-272,2015.

K.Arai, “wireless power transfer solution for “Things in the internet of things” , proceedings of the Future Technologies Conference (FTC), vol. 1. 2018.

M. Shidujaman, H. Samani, and M.Arif, “Wireless power transmission trends,” 2014 Int. Conf. Informatics, Electron. Vision, ICIEV 2014, 2014.

H. Hong, D. Yang, and S.Won, “The Analysis for Selecting Compensating Capacities of Two-Coil Resonant Wireless Power Transfer System,” Proc.- 1st IEEE Int. Conf. Energy Internet, ICEI 2017, pp. 220-225,2017.

Y. Zhang, Z. Yan, Z. Liang, S. Li, and C. Mi, “An LCL-N Compensated Strongly- JoinedWireless Power Transfer System for High-Power Applications,” 2019 IEEE Appl. Power Electron. Conf. Expo., pp. 3088–3091, 2019

P. S. Patil and S.K. Padaganur, “Challenging Issues In Wire Less Power Transmission MethodsA Survey,” International Journal of Scientific and Technology Research vol. 7,no. 8, pp.136-139, 2018.

A. Massa,G. Oliveri, F . Viani, and P. Rocca, “Array designs for long-distance wireless power transmission: State-of-the-art and innovative solutions,” Proc.IEEE, vol. 101, no.6,pp. 1464-1481, 2013.

X. Lu, P. Wang, D. Niyato, D.I. Kim, Z. Han, and C. Engineering, “Wireless Charging Technologies : Fundamentals,Standards, and Network Applicatons,” EEE Comunications Surveys and Tutorials, 2016,pp. 1-40.

C. Mkasanga, “A Feasability Study of Wireless Charging” https://www.academia.edu/9567045/A_Feasability_Study_of_Wireless_Charging 2012.

A.Arshad, S.Khan,A.H.M. Zahirul Alam, and R. Tasnim, “Investigation of inductive timbre approach for non-contact bidirectional transfer of power and signal,” 2012 Int. Conf. Comput. Commun. Eng. ICCCE 2012,no. July, pp. 570-573,2012.

V. Shevchenko and S. Member, “Compensation Topologies in IPT Systems : Standards, Requirements, Classification, Analysis, Comparison and Application,” IEEE Access , pp. 120559-120580, 2019.

Y.Luo, Y.Yang, S. Chen, and X. Wen, “Power Waves-based Analysis of Mgnetically Joined Resonant Wireless Power Transfer”, IEEE Accss,pp. 878-882, 2017.

Sang Wook Han, “Wireless Interconnect using Inductive Timbre in 3D-ICs ” https://deepblue,lib.umich.edu/bitstream/handle/2027.42/94034/swahanpns_1.pdf?sequence=1 2012.

X.Chen and X.Gong, “Modeling of wireless power system with giant magnetostrictive materials load under multi-field timbre,’’ Conf. Proc. –IEEE Appl. Power Electron. Conf. Expo.- APEC,no. Mci,pp. 3100-3105,2017.

P. Bakolia, “Wireless Power Transmisson- The Future of Power Transmission System. By”,Journal of Advanced Computing and Communication Technologies,no. 5,pp. 48-54, 2017.

E. Waffenschmidt, “wireless Power for Mobile Devices.”, NTELEC, International Telecommunication Energy Conference (Proceeding),2011.

T. S. C. Rao, “Categories, Standard and Recents Trends in Wireless Power Transfer: ASurvey” Indian Journal of Science and Technology, vol. 9, no. May 2016.

X. Mou, S. Member, and H. Sun, “wireless Power Transfer : Survey and Roadmap”, IEE vehicular Technology Conference, no. 646470, pp. 1-13, 2015.

P. Dubal, “Rezence- Wireless Charging Standard based on Magnetic Resonance,” Int. J. Adv. Res. Comput. Commun . Eng., vol. 4, no.12,pp. 198-200,2015.

Vladislav Khayrudinov “ Wireless Power Transfer system : Development and Implementation”, ResearchGate,2015.

S. H S, “Wireless Charging Techniques – A Survey,” Int. J. Res. Appl. Sci. Eng. Technol.,vol.V, no. III,pp. 480-484,2017.

V.Khayrudinov, “ Wireless Power Transfer system; Development and Implementation”, ResearchGate,2015.

R . Gupta, “Is Qi Wireless Charging Worth It: Pros and Cons,” https://www.guidingtech.com/qi-wireless-charging-pros-cons/ pp.1-7,2018.

A. V . Kumar, P. Niklesh, and T. Naveen, “Wireless Power Transmission,” International Journal of Engineering and Application ,vol.1,no. 4.pp. 1506-1510.

W. Is and W. Power, “Introduction to Wireles Power Transfer : Benefits, Markets, and what is your opinion ?”, Mendeley,pp. 1-2, 2019.

S. Das, “Review Paper on Wireless Power Transmission for Charging Mobile Devices,”, mendeley,vol.6,no.3,pp.20751-20755,2017.

M. Fareq, M. Fitra, M. Irwanto, S. Hasan, and M. Arinal, “Low Wireless Power transfer using Inductive Timbre for a mobile phone charger” IOPscience, vol 495,pp. 1-7, 2014.

A. Uchida, “three-dimensional Wireless power ttransfer Method to Relaize efficient Charging of IoT Devices” FUJITSU Sci. Tech. J., vol. 53, No. 2, pp. 51-56, pp. 51-56 February 2017.

N. W. P. Transfer, “Wireless Charging of Electric Vehicles” http//www.ncbi.nlm.nih.gov/books/NBK481644/#, no. Dc, pp. 1-6, 2019.

R.A. Assistant, A.M. Assistant, and R. K. Student, “Various Optimization techniques used in Wireless Sensor networks key Words;” International Research Journal of Engineering and Technology (IRJET), pp. 2085-200, 2016.

Sherje, D. N. . (2021). Thermal Property Investigation in Nanolubricants via Nano- Scaled Particle Addition. International Journal of New Practices in Management and Engineering, 10(01), 12–15. https://doi.org/10.17762/ijnpme.v10i01.96

M. Simic, C. Bil, and V. Vojisavljevic, “Investigation in wireless power transmission for UAV charging,” Procedia- Procedia Comput. Sci., vol. 60, pp. 1846-1855, 2015.

I. contraol, “power Transfer System Application,” http://www.google.ch/patents/US20120299392, pp. 255-259, 2017.

S. Li, W. Li, S. Member, J. Deng, and S. Member, “A Double-Sided LCC Compensation Network and Its tuning Method For Wireless Power Tranfer,” IEEE Transactions on Vehicular Technology vol.64,no.6,pp.2261-2273,2015

C.Park et al., “Innovative 5m-off-distance Inductive Power Tranfer system with optimally shaped Dipole Coils,” IEEE Transaction on Power Electronics, vol.8993,no.c,2014.

C. Saha et al., “ Wireless power transfer using relay resonators Wireless power transfer using relay resonstors,” AIP Conference Proceedings,vol. 263902,2018.

N.A. Rashid et al., “Design and Optimization of Magnetic Resonance Timbre by using Relay Effect.”, 2016 10th European Conference on Antennas and Propagation,EuCAP,2016.

N.A.Rashid,M.N.M. Yasin, K.Kamardin, N.Ramli,M.Jusoh, and S.A.Z. Murad, “A Study on Relay Effect via Magnetic Reasonant Timbre for Wireless Power Transfer,’’ MATEC Web of conferences, vol. 01095,2016.

N.Ha-van, “Analytical and Experimental Investigations of Omnidirectional Wireless Wireless Power Transfer Using a Cubic Transmitter”,IEEE Transmitter on Industrial Electronics,vol.65,n0.2,pp.1358-1366,2018.

M. Liu and M.Chen, “ Dual-Band Multi-Receiver Wireless Power Transfer: Architecture, Topology, and Control”, Conference Proceedings-IEEE Applied Power Electronics Conference and Exposition-APEC,2019.

X.Zhang, C.Zhang, S. Yao, H. QI, and Y. Xu, “optimal design and analysis of Wireless Power Transfer system with converter circuit”, EURASIP Journal on Wireless Communications and Networking pp.1-6,2017.

A.You, M.A.Y.Be, and I. In, “Optimization of output power and transmission efficiency of magnetically joinedresonance wireless power transfer system”, AIP Advances,vol.056625,2018.

M.Wang, J.Feng, Y.Shi, M. Shen,and J.Jing, “A Novel PSO-Based Transfer Efficiency Optimization Algorithm for Wireless power transfer”.Progress In Electromagnetics Research, vol. 85,no.July,pp63-75,2018.